Betagard Water Based Polymeric Coagulants and Flocculants
PT Beta Pramaesti Asia
Betagard Water Based Polymeric Coagulants and Flocculants
BETAGARD 6400
For Flocculation and Dewatering Treatment
BETAGARD 6400 is a cationic polydiallyl dimethyl ammonium chloride that functions effectively as a primary coagulant or coagulant aid in water or wastewater purification, pulp and paper industry, textile industry, oil from steel mills, automobile plants, petrochemical plants, and others. BETAGARD 6400 reduces the dosage of inorganic coagulants or eliminates their use. As a result, sludge volumes and treatment costs are reduced to a large extent.
CHARACTERISTICS
- Excellent neutralizing effect against SS electric charge in water.
- Effective wastewater including oil and grease.
- Effective to reduce sludge volume.
- Cationic type.
- Liquid type with easy handling.
Technical Specifications
| Physical Form | Appearance | pH (0.5% solution) | Main ingredient | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Solid (powder) | White to brass colored powder. | Poly cationic organic coagulant | Poly cationic organic coagulant |
Protect face and hands with a mask and rubber gloves to avoid direct contact with Betagard 6400.
|
Available in plastic container sizes of 15 kgs or PE bags up to 25 kgs. |
Dosage & Usage Instructions:
Dose BETAGARD 6400 1 - 50 mg/l with or without dilution into coagulation tank or system pH control tank with metric pump.
- The combined use of inorganic coagulants such as PAC, Alum or ACH with BETAGARD 6400 is effective.
- Use a suitable high polymer flocculant (Betagard 6100) to form large flocks after coagulant treatment with BETAGARD 6400.
BETAGARD 6100
Anionic Flocculant
BETAGARD 6100 is an anionic polyelectrolyte, serving as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is a highly charged anionic polymer, which will serve as an effective flocculant in many liquid/solids separation systems, including clarification, thickening and dewatering. This product is suitable for applications where the flocks formed are subject to high shear. Stock solutions are typically prepared at a concentration of 0.1 to 0.5%. Due to its low residual monomer content, BETAGARD 6100 can be used in drinking water treatment up to a maximum concentration of 1.0 mg/l, as approved by the Indonesian Ministry of Health.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Anionic | Very High | BETAGARD 6100 solution is essentially non-corrosive. Recommended materials of construction for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6100 should be stored in a dry place with an ambient temperature of not more than 38o C. Tightly close the drum container after use. | Available in plastic container sizes of 15 kgs or PE bags up to 25 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6100 for different applications is as follows:
- Flocculant: 0.1 - 2.0 ppm
- Coagulant Aid: 0.05 - 1.0 ppm
- Filtration Aid: 0.01 - 1.0 ppm
- Sludge Dewatering: 0.5 - 4.0 kg per ton of dry solids
The actual dosage should be determined in a laboratory tube test. Stock solutions are usually made to a concentration of 0.1 to 0.5%. Do not use high speed, high shear mechanical mixers for stirring. Such stock solutions are stable for at least 3 days. Refer to the polymer mixing procedure bulletin. For best performance, further dilute the stock solution with clean water to 0.02% or less, prior to introduction to the process stream. However, this is usually determined by inspection of available facilities. Recommended transfer pumps are gear type or positive displacement piston or diaphragm pumps.
BETAGARD 6100 Series
RO & UF ANTISCALANT and WETTED SURFACE AIR COOLER SCALE INHOBITOR
Betagard 6100 Series is a multifunctional antiscalant and antifoulant for reverse osmosis systems, highly effective in controlling crystallization and particulate fouling on membrane surfaces.
Betagard 6100 will control the scale deposition of CaCO3, CaSO4, BaSO4, and CaF2. Betagard 6100 is formulated to control soluble and insoluble iron and actively disperse particulates. Effective against silica fouling, Hydro 600 is specifically designed for use on Thin Film and CA membranes.
Technical Specifications
| Physical Form | pH | Sp. Gravity at 25 DEG C | Handling and Storage Measures | Packaging |
|---|---|---|---|---|
| Colorless clear colored liquid. | 5.0 - 6.0 | Anionic | Keep out of reach of children. In case of accidental splashing, flush with plenty of water. And for eye contact, must receive medical attention as a safety measure. | Available in plastic container size with a net weight of 200 liters / drum. |
Dosage & Usage Instructions:
Betagard 6100 is an aqueous solution of organic acids and is corrosive in concentrated form. Therefore, corrosion resistant dosing equipment should be used. Examples of suitable materials are 316L stainless steel or plastics such as GRP, PVC and PE. The recommended injection point is into the feed water downstream of filtration equipment and cartridge filters. Betagard 6100 is miscible with water in all proportions.
It can be applied as a neat product, or as a solution in distillate. A minimum dosage solution strength of 10% w/b is recommended. Betagard 6100 should be dosed continuously and in proportion to the feed water flow, to maintain the recommended dosing rate. The dosage rate required depends on the feed water quality and the saturation index of the various scale forming species present in the concentrated brine. The usual dosage rate range is between 5 - 15 ppm.
BETAGARD 6110
Anionic Flocculant
BETAGARD 6110 is an anionic polyelectrolyte, serving as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is a highly charged anionic polymer, which will serve as an effective flocculant in many liquid/solids separation systems, including clarification, thickening and dewatering. This product is suitable for applications where the flocks formed are subject to high shear. Stock solutions are typically prepared at concentrations of 0.1 to 0.5%. Due to its low residual monomer content, BETAGARD 6110 can be used in drinking water treatment up to a maximum concentration of 1.0 mg/l, as approved by the Indonesian Ministry of Health.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Anionic | Very High | BETAGARD 6110 solution is essentially non-corrosive. Recommended materials of construction for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6110 should be stored in a dry place with an ambient temperature of no more than 38oC. Tightly close the drum container after use. | Available in fiber drum or PE bag size - 25 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6110 for different applications is as follows:
- Flocculant: 0.1 - 2.0 ppm
- Coagulant Aid: 0.05 - 1.0 ppm
- Filtration Aid: 0.01 - 1.0 ppm
- Sludge Dewatering: 0.5 - 4.0 kg per ton of dry solids
The actual dosage should be determined in a laboratory tube test. Stock solutions are usually made to a concentration of 0.1 to 0.5%. Do not use high speed, high shear mechanical mixers for stirring. Such stock solutions are stable for at least 3 days. Refer to the polymer mixing procedure bulletin. For best performance, further dilute the stock solution with clean water to 0.02% or less, prior to introduction to the process stream. However, this is usually determined by inspection of available facilities. Recommended transfer pumps are gear type or positive displacement piston or diaphragm pumps.
BETAGARD 6120
Anionic Flocculant
BETAGARD 6120 is an anionic polyelectrolyte, serving as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is a highly charged anionic polymer, which will serve as an effective flocculant in many liquid/solids separation systems, including clarification, thickening and dewatering. This product is suitable for applications where the flocks formed are subject to high shear. Stock solutions are typically prepared at concentrations of 0.1 to 0.5%. Due to its low residual monomer content, BETAGARD 6120 can be used in drinking water treatment up to a maximum concentration of 1.0 mg/l, as approved by the Indonesian Ministry of Health.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Anionic | Very High | BETAGARD 6120 solutions are essentially non-corrosive. Recommended construction materials for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6120 should be stored in a dry place with an ambient temperature of no more than 38oC. Close the drum container tightly after use. | Available in fiber drum or PE bag size - 25 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6120 for different applications is as follows:
- Flocculant: 0.1 - 2.0 ppm
- Coagulant Aid: 0.05 - 1.0 ppm
- Filtration Aid: 0.01 - 1.0 ppm
- Sludge Dewatering: 0.5 - 4.0 kg per ton of dry solids
The actual dosage should be determined in a laboratory tube test. Stock solutions are usually made to a concentration of 0.1 to 0.5%. Do not use high speed, high shear mechanical mixers for stirring. Such stock solutions are stable for at least 3 days. Refer to the polymer mixing procedure bulletin. For best performance, further dilute the stock solution with clean water to 0.02% or less, prior to introduction to the process stream. However, this is usually determined by inspection of available facilities. Recommended transfer pumps are gear type or positive displacement piston or diaphragm pumps.
BETAGARD 6130
Anionic Flocculant
BETAGARD 6130 is an anionic polyelectrolyte, serving as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is a highly charged anionic polymer, which will serve as an effective flocculant in many liquid/solids separation systems, including clarification, thickening and dewatering. This product is suitable for applications where the flocks formed are subject to high shear. Stock solutions are typically prepared at concentrations of 0.1 to 0.5%. Due to its low residual monomer content, BETAGARD 6130 can be used in drinking water treatment up to a maximum concentration of 1.0 mg/l, as approved by the Indonesian Ministry of Health.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Anionic | Very High | BETAGARD 6130 solutions are essentially non-corrosive. Recommended construction materials for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6130 should be stored in a dry place with an ambient temperature of not more than 38oC. Tightly close the drum container after use. | Available in fiber drum or PE bag size - 25 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6130 for different applications is as follows:
- Flocculant: 0.1 - 2.0 ppm
- Coagulant Aid: 0.05 - 1.0 ppm
- Filtration Aid: 0.01 - 1.0 ppm
- Sludge Dewatering: 0.5 - 4.0 kg per ton of dry solids
Actual dosage should be determined in a laboratory tube test. Stock solutions are usually made to a concentration of 0.1 to 0.5%. Do not use high speed, high shear mechanical mixers for stirring. Such stock solutions are stable for at least 3 days. Refer to the polymer mixing procedure bulletin. For best performance, further dilute the stock solution with clean water to 0.02% or less, prior to introduction to the process stream. However, this is usually determined by inspection of available facilities. Recommended transfer pumps are gear type or positive displacement piston or diaphragm pumps.
BETAGARD 6140
Anionic Flocculant
BETAGARD 6140 is an anionic polyelectrolyte, serving as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is a highly charged anionic polymer, which will serve as an effective flocculant in many liquid/solids separation systems, including clarification, thickening and dewatering. This product is suitable for applications where the flocks formed are subject to high shear. Stock solutions are typically prepared at a concentration of 0.1 to 0.5%. Due to its low residual monomer content, BETAGARD 6140 can be used in drinking water treatment up to a maximum concentration of 1.0 mg/l, as approved by the Indonesian Ministry of Health.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Anionic | Very High | BETAGARD 6140 solutions are essentially non-corrosive. Recommended construction materials for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6140 should be stored in a dry place with an ambient temperature of not more than 38oC. Tightly close the drum container after use. | Available in fiber drum or PE bag size - 25 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6140 for different applications is as follows:
- Flocculant: 0.1 - 2.0 ppm
- Coagulant Aid: 0.05 - 1.0 ppm
- Filtration Aid: 0.01 - 1.0 ppm
- Sludge Dewatering: 0.5 - 4.0 kg per ton of dry solids
Actual dosage should be determined in a laboratory tube test. Stock solutions are usually made to a concentration of 0.1 to 0.5%. Do not use high speed, high shear mechanical mixers for stirring. Such stock solutions are stable for at least 3 days. Refer to the polymer mixing procedure bulletin. For best performance, further dilute the stock solution with clean water to 0.02% or less, prior to introduction to the process stream. However, this is usually determined by inspection of available facilities. Recommended transfer pumps are gear type or positive displacement piston or diaphragm pumps.
BETAGARD 6150
Anionic Flocculant
BETAGARD 6150 is an anionic polyelectrolyte, serving as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is a highly charged anionic polymer, which will serve as an effective flocculant in many liquid/solids separation systems, including clarification, thickening and dewatering. This product is suitable for applications where the flocks formed are subject to high shear. Stock solutions are typically prepared at a concentration of 0.1 to 0.5%. Due to its low residual monomer content, BETAGARD 6150 can be used in drinking water treatment up to a maximum concentration of 1.0 mg/l, as approved by the Indonesian Ministry of Health.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Anionic | Very High | BETAGARD 6150 solutions are essentially non-corrosive. Recommended construction materials for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6150 should be stored in a dry place with an ambient temperature of no more than 38oC. Close the drum container tightly after use. | Available in plastic drum size 15 kgs or PE bag - 25 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6150 for different applications is as follows:
- Flocculant: 0.2 - 2.0 ppm
- Coagulant Aid: 0.1 - 1.0 ppm
- Filtration Aid: 0.02 - 1.0 ppm
- Sludge Dewatering: 0.5 - 4.0 kg per ton of dry solids
Actual dosage should be determined in a laboratory tube test. Stock solutions are usually made to a concentration of 0.1 to 0.5%. Do not use high speed, high shear mechanical mixers for stirring. Such stock solutions are stable for at least 3 days. Refer to the polymer mixing procedure bulletin. For best performance, further dilute the stock solution with clean water to 0.02% or less, prior to introduction to the process stream. However, this is usually determined by inspection of available facilities. Recommended transfer pumps are gear type or positive displacement piston or diaphragm pumps.
BETAGARD 6160
Anionic Flocculant
BETAGARD 6160 is an anionic polyelectrolyte, serving as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is a highly charged anionic polymer, which will serve as an effective flocculant in many liquid/solids separation systems, including clarification, thickening and dewatering. This product is suitable for applications where the flocks formed are subject to high shear. Stock solutions are typically prepared at a concentration of 0.1 to 0.5%. Due to its low residual monomer content, BETAGARD 6160 can be used in drinking water treatment up to a maximum concentration of 1.0 mg/l, as approved by the Indonesian Ministry of Health.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Anionic | Very High | BETAGARD 6160 solutions are essentially non-corrosive. Recommended construction materials for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6160 should be stored in a dry place with an ambient temperature of no more than 38oC. Close the drum container tightly after use. | Available in plastic drum size 15 kgs or PE bag - 25 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6160 for different applications is as follows:
- Flocculant: 0.2 - 2.0 ppm
- Coagulant Aid: 0.1 - 1.0 ppm
- Filtration Aid: 0.02 - 1.0 ppm
- Sludge Dewatering: 1.0 - 4.0 kg per ton of dry solids
Actual dosage should be determined in a laboratory tube test. Stock solutions are usually made to a concentration of 0.1 to 0.5%. Do not use high-speed, high-shear mechanical mixers for stirring. Such stock solutions are stable for at least 3 days. Refer to the polymer mixing procedure bulletin. For best performance, further dilute the stock solution with clean water to 0.02% or less, prior to introduction to the process stream. However, this is usually determined by inspection of available facilities. Recommended transfer pumps are gear type or positive displacement piston or diaphragm pumps.
BETAGARD 6170
Anionic Flocculant
BETAGARD 6170 is an anionic polyelectrolyte, serving as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is a highly charged anionic polymer, which will serve as an effective flocculant in many liquid/solids separation systems, including clarification, thickening and dewatering. This product is suitable for applications where the flocks formed are subject to high shear. Stock solutions are typically prepared at a concentration of 0.1 to 0.5%. Due to its low residual monomer content, BETAGARD 6170 can be used in drinking water treatment up to a maximum concentration of 1.0 mg/l, as approved by the Indonesian Ministry of Health.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Anionic | Very High | BETAGARD 6170 solution is essentially non-corrosive. Recommended materials of construction for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6170 should be stored in a dry place with an ambient temperature of no more than 38oC. Tightly close the drum container after use. | Available in fiber drum or PE bag size - 15 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6170 for different applications is as follows:
- Flocculant: 0.2 - 2.0 ppm
- Coagulant Aid: 0.1 - 1.0 ppm
- Filtration Aid: 0.02 - 1.0 ppm
- Sludge Dewatering: 1.0 - 4.0 kg per ton of dry solids
The actual dosage should be determined in a laboratory test tube. Stock solutions are usually prepared at a concentration of 0.1 to 0.5%. Do not use high-speed, high-shift mechanical mixers for stirring. Such stock solutions are stable for at least 3 days. Refer to the polymer mixing procedure bulletin. For best performance, further dilute the stock solution with clean water to 0.02% or less, prior to introduction to the process stream. However, this is usually determined by inspection of available facilities. Recommended transfer pumps are gear type or positive displacement piston or diaphragm pumps.
BETAGARD 6200
Cationic Flocculant
BETAGARD 6200 is a cationic polyelectrolyte, functioning as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is used primarily for wastewater purification, as well as for thickening and dewatering municipal and industrial sewage sludge (centrifuges, belt filter presses, chamber filter presses). This product is particularly suitable for applications where the formed flocks are subjected to high shear.
Stock solutions are usually prepared at a concentration of 0.1 to 0.5%.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Cationic | Very High | BETAGARD 6200 solution is essentially non-corrosive. Recommended materials of construction for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6200 should be stored in a dry place with an ambient temperature of not more than 38oC. Tightly close the drum container after use. | Available in fiber drum or PE bag size - 15 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6200 for different applications is as follows:
- Clarification of secondary effluent: 1 - 5 ppm.
- Flocculation, thickening, and dewatering of primary and secondary sludge of municipal sewage and of various industries: 0.5 - 4.0 kg per ton of dry solids.
- Centrifugal operation: 1.5 - 5.0 kg per ton of dry solids.
The actual dosage should be determined in a laboratory tube test. Stock solutions are usually made to a concentration of 0.1 to 0.5%. Do not use high speed, high shear mechanical mixers for agitating. This stock solution is stable for at least two days without significant changes in its charge density that could affect its performance results. To ensure the stability of the solution, it is recommended to use water with a temperature lower than 40oCfor dissolution, and the pH of the solution should be controlled within the range of 5.0 - 6.5. For best performance, before feeding to the process stream, further dilute the stock solution with clean water to 0.02% - 0.03% or less. Dilution can be done using in-line dilution or by using a dilution tank. However, this is usually determined by inspection of the facilities available. The recommended transfer pumps are gear type piston pumps or positive displacement piston pumps.
BETAGARD 6210
Cationic Flocculant
BETAGARD 6210 is a cationic polyelectrolyte, functioning as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is used primarily for wastewater purification, as well as for thickening and dewatering municipal and industrial sewage sludge (centrifuges, belt filter presses, chamber filter presses). This product is particularly suitable for applications where the formed flocks are subjected to high shear.
Stock solutions are usually prepared at a concentration of 0.1 to 0.5%.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Cationic | Very High | BETAGARD 6210 solution is essentially non-corrosive. Recommended materials of construction for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6210 should be stored in a dry place with ambient temperature not more than 38oC. Tightly close the drum container after use. | Available in fiber drum or PE bag size - 25 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6210 for different applications is as follows:
- Clarification of secondary effluent: 1 - 5 ppm.
- Flocculation, thickening, and dewatering of primary and secondary sludge of municipal sewage and of various industries: 0.5 - 4.0 kg per ton of dry solids.
- Centrifugal operation: 1.5 - 5.0 kg per ton of dry solids.
The actual dosage should be determined in a laboratory tube test. Stock solutions are usually made to a concentration of 0.1 to 0.5%. Do not use high speed, high shear mechanical mixers for agitating. This stock solution is stable for at least two days without significant changes in its charge density that could affect its performance results. To ensure the stability of the solution, it is recommended to use water with a temperature lower than 40oCfor dissolution, and the pH of the solution should be controlled within the range of 5.0 - 6.5. For best performance, before feeding to the process stream, further dilute the stock solution with clean water to 0.02% - 0.03% or less. Dilution can be done using in-line dilution or by using a dilution tank. However, this is usually determined by inspection of the facilities available. The recommended transfer pumps are gear type piston pumps or positive displacement piston pumps.
BETAGARD 6220
Cationic Flocculant
BETAGARD 6220 is a cationic polyelectrolyte, functioning as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is used primarily for wastewater purification, as well as for thickening and dewatering municipal and industrial sewage sludge (centrifuges, belt filter presses, chamber filter presses). This product is particularly suitable for applications where the formed flocks are subjected to high shear.
Stock solutions are usually prepared at a concentration of 0.1 to 0.5%.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Cationic | Very High | BETAGARD 6220 solution is essentially non-corrosive. Recommended materials of construction for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6220 should be stored in a dry place with an ambient temperature of not more than 38oC. Close the drum container tightly after use. | Available in fiber drum or PE bag size - 25 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6220 for different applications is as follows:
- Clarification of secondary effluent: 1 - 5 ppm.
- Flocculation, thickening, and dewatering of primary and secondary sludge of municipal sewage and of various industries: 0.5 - 4.0 kg per ton of dry solids.
- Centrifugal operation: 1.5 - 5.0 kg per ton of dry solids.
The actual dosage should be determined in a laboratory tube test. Stock solutions are usually made to a concentration of 0.1 to 0.5%. Do not use high speed, high shear mechanical mixers for agitating. This stock solution is stable for at least two days without significant changes in its charge density that could affect its performance results. To ensure the stability of the solution, it is recommended to use water with a temperature lower than 40oCfor dissolution, and the pH of the solution should be controlled within the range of 5.0 - 6.5. For best performance, before feeding to the process stream, further dilute the stock solution with clean water to 0.02% - 0.03% or less. Dilution can be done using in-line dilution or by using a dilution tank. However, this is usually determined by inspection of the facilities available. The recommended transfer pumps are gear type piston pumps or positive displacement piston pumps.
BETAGARD 6230
Cationic Flocculant
BETAGARD 6230 is a cationic polyelectrolyte, functioning as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is used primarily for wastewater purification, as well as for thickening and dewatering municipal and industrial sewage sludge (centrifuges, belt filter presses, chamber filter presses). This product is particularly suitable for applications where the formed flocks are subjected to high shear.
Stock solutions are usually prepared at a concentration of 0.1 to 0.5%.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Cationic | Very High | BETAGARD 6230 solution is essentially non-corrosive. Recommended construction materials for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6230 should be stored in a dry place with an ambient temperature of not more than 38oC. Tightly close the drum container after use. | Available in fiber drum or PE bag size - 25 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6230 for different applications is as follows:
- Clarification of secondary effluent: 1 - 5 ppm.
- Flocculation, thickening, and dewatering of primary and secondary sludge of municipal sewage and of various industries: 0.5 - 4.0 kg per ton of dry solids.
- Centrifugal operation: 1.5 - 5.0 kg per ton of dry solids.
The actual dosage should be determined in a laboratory tube test. Stock solutions are usually made to a concentration of 0.1 to 0.5%. Do not use high speed, high shear mechanical mixers for agitating. This stock solution is stable for at least two days without significant changes in its charge density that could affect its performance results. To ensure the stability of the solution, it is recommended to use water with a temperature lower than 40oCfor dissolution, and the pH of the solution should be controlled within the range of 5.0 - 6.5. For best performance, before feeding to the process stream, further dilute the stock solution with clean water to 0.02% - 0.03% or less. Dilution can be done using in-line dilution or by using a dilution tank. However, this is usually determined by inspection of the facilities available. The recommended transfer pumps are gear type piston pumps or positive displacement piston pumps.
BETAGARD 6240
Cationic Flocculant
BETAGARD 6240 is a cationic polyelectrolyte, functioning as a coagulant aid or sludge conditioning agent in liquid-solids separation processes. This product is used primarily for wastewater purification, as well as for thickening and dewatering municipal and industrial sewage sludge (centrifuges, belt filter presses, chamber filter presses). This product is particularly suitable for applications where the formed flocks are subjected to high shear.
Stock solutions are usually prepared at a concentration of 0.1 to 0.5%.
Technical Specifications
| Physical Form | Bulk Density, gr/ml | Ionic Charge | Molecular Weight | Handling and Storage Measures | Packaging |
|---|---|---|---|---|---|
| Off white colored powder. | 0.65 - 0.90 | Cationic | Very High | BETAGARD 6240 solution is essentially non-corrosive. Recommended materials of construction for solution handling include black iron, mild steel, fiber glass, plastics, and other more resistant materials. Galvanized equipment should not be used. Spilled polymer is very slippery. Spilled polymer should be scooped up and wiped off before rinsing with water. BETAGARD 6240 should be stored in a dry place with an ambient temperature of not more than 38oC. Tightly close the drum container after use. | Available in fiber drum or PE bag size - 25 kgs. |
Dosage & Usage Instructions:
The recommended dosage of BETAGARD 6240 for different applications is as follows:
- Clarification of secondary effluent: 1 - 5 ppm.
- Flocculation, thickening, and dewatering of primary and secondary sludge of municipal sewage and of various industries: 0.5 - 4.0 kg per ton of dry solids.
- Centrifugal operation: 1.5 - 5.0 kg per ton of dry solids.
The actual dosage should be determined in a laboratory tube test. Stock solutions are usually made to a concentration of 0.1 to 0.5%. Do not use high speed, high shear mechanical mixers for agitating. This stock solution is stable for at least two days without significant changes in its charge density that could affect its performance results. To ensure the stability of the solution, it is recommended to use water with a temperature lower than 40oCfor dissolution, and the pH of the solution should be controlled within the range of 5.0 - 6.5. For best performance, before feeding to the process stream, further dilute the stock solution with clean water to 0.02% - 0.03% or less. Dilution can be done using in-line dilution or by using a dilution tank. However, this is usually determined by inspection of the facilities available. The recommended transfer pumps are gear type piston pumps or positive displacement piston pumps.
Contact Us
Want to know more about BETAGARD Anionic and Cationic Oil Based Polymeric Flocculants? Contact us now to get more information or for technical consultation regarding the application of this product in your water treatment system.