Mining
Solvent Base Degreaser: TERRAGARD EXSO 504 and EXSO 508
Updated
A solvent base degreaser dissolves oil and grease without water and dries fast. When to use it, EXSO 504 vs EXSO 508, safety controls, and how to trial it.
Discuss the application.
Send the application, operating conditions and the result you expect. Our team will discuss the options with you.
A solvent base degreaser is a solvent cleaner that dissolves oil, grease, tar, and oily dirt directly, without water, and then evaporates so the surface dries quickly. It is used on engine components, spare parts, and areas that must not be rinsed with water. PT Beta Pramesti Asia supplies TERRAGARD EXSO 504 and TERRAGARD EXSO 508, two solvent degreasers with different flash points, for workshops and heavy-equipment maintenance.
Updated: 12 November 2026.
This page is part of the TERRAGARD degreaser guide, which compares water-based, quick-break, and solvent degreasers.
When is a solvent base degreaser used?
- Cleaning removed engine components and spare parts by soaking or brushing.
- Releasing thick grease and hardened oil from components before inspection or reassembly.
- Cleaning metal surfaces before painting, coating, or welding, where the next process allows it.
- Targeted cleaning in areas that must stay dry or have no wash-water drain.
For routine washing of equipment bodies, trucks, and workshop floors with a water rinse, a heavy duty water-based degreaser is usually more practical. If wash water goes to an oil-water separator, see the quick break degreaser.
What is the difference between TERRAGARD EXSO 504 and EXSO 508?
Both are solvent-based cleaners for removing oil, grease, and dirt from engines and spare parts. They evaporate to speed drying without leaving a residue that attracts carbon dust, metal particles, or other contaminants that can damage equipment. According to the data sheets, both are non-rusting, safe on metals, and usable on well-bonded paint. The main difference is flash point.
| Parameter | TERRAGARD EXSO 504 | TERRAGARD EXSO 508 |
|---|---|---|
| Appearance | Clear colourless liquid | Clear colourless liquid |
| Odour | Solvent | Solvent |
| Specific gravity | 0.75-0.85 g/cm³ | 0.75-0.85 g/cm³ |
| Flash point | 40°C | >77°C |
| Solubility in water | Insoluble | Insoluble |
| Application | Immersion or brush. For thick, hard oil or grease, soak for 5-10 minutes, then wipe and allow to dry | Same |
| Storage | Do not store above 45°C or near strong oxidising agents | Same |
| Packaging | HDPE 25 L pail, 200 L drum, or 1,000 L IBC | HDPE 25 L pail, 200 L drum, or 1,000 L IBC |
The higher flash point of EXSO 508 is a consideration for workshops that want to reduce fire risk. The final choice still follows the site risk assessment and the current SDS.
What are the risks and safety controls?
| Risk | Control |
|---|---|
| Fire and vapour | Keep away from ignition sources, welding sparks, and hot surfaces; ensure ventilation; keep containers closed |
| Worker exposure | Wear gloves and eye protection per the SDS; avoid skin and eye contact |
| Materials | Test on rubber, seals, plastics, and coatings before wide use |
| Waste | Collect spent solvent, sludge, and oily rags separately according to the site’s waste classification; never discharge to drains or the oil-water separator |
How do you trial a solvent degreaser?
- Choose components that represent the most common soil and photograph them before cleaning.
- Soak or brush according to the data sheet and record contact time.
- Check cleanliness, residue, drying time, and any change to seals and paint.
- Record product use per component and how many times a soak bath can be used before replacement.
- Compare with the current method before setting a standard procedure.
What should you send us for a quotation?
- Component types and soils, with photos.
- Method of use: soak tank, parts washer, brush, or wipe.
- Flash point requirements or safety limits in the work area.
- Estimated monthly use and preferred packaging.
- Delivery location.
Send these details through our technical team.
Frequently asked questions about solvent base degreasers
What is a solvent base degreaser?
A solvent base degreaser uses organic solvents, not water, to dissolve oil and grease. It is used neat, without water dilution, and allowed to evaporate or wiped off once the soil is released.
What is the difference between solvent-based and water-based degreasers?
Solvent-based degreasers dissolve oil without water and dry fast, suiting components and spare parts, but need vapour and ignition control. Water-based degreasers are diluted and rinsed, with lower fire risk, but produce wash water that must be treated.
Do EXSO 504 and EXSO 508 need dilution?
No. According to the data sheets, both are applied directly by immersion or brush. For thick, hard soil, components are soaked for 5-10 minutes, then wiped and allowed to dry.
Can a solvent degreaser be used on electrical components?
Never use it on energised equipment. For isolated electrical components, follow the equipment manufacturer’s instructions and test material compatibility first.
See also the TERRAGARD degreaser selection guide and how to choose the right degreaser for mining machinery.